Datasheet4U Logo Datasheet4U.com

XC6501A - High Speed LDO Regulator

Download the XC6501A datasheet PDF. This datasheet also covers the XC6501 variant, as both devices belong to the same high speed ldo regulator family and are provided as variant models within a single manufacturer datasheet.

General Description

The XC6501 series is a high speed, low noise CMOS LDO regulator that can provide stable output voltages even without a load capacitor CL.

This is possible because phase compensation is carried out internally unlike other LDOs where it is done externally.

Key Features

  • Maximum Output Current : 200mA Operating Voltage Range Output Voltage Range Dropout Voltage Low Power Supply Stand-by Current : 1.4V ~ 6.0V 2.0V ~ 5.0V (±1%) (.
  • 1) : 1.2V ~ 1.95V (±0.02V) (.
  • 1) : 150mV＠IOUT=100mA, VOUT=2.8V : 13μA ＠VOUT=2.8V : Less than 0.1μA Ripple Rejection Protection Circuits : 50dB＠f=1kHz,VOUT=2.8V : Current limit (300mA, TYP. ) Short circuit protection CL High Speed Auto-Discharge Output capacitor is not required : Internal phase compensation CL High Speed Au.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (XC6501_TorexSemiconductor.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Torex Semiconductor

Part Number Description
XC6501 High Speed LDO Regulator
XC6501B High Speed LDO Regulator
XC6501C High Speed LDO Regulator
XC6501D High Speed LDO Regulator
XC6501P High Speed LDO Regulator
XC6504 Ultra Low Power Consumption Small Voltage Regulator
XC6506 Ultra-Low Supply Current Voltage Regulator
XC651A CMOS Low Power Consumption
XC6101 Voltage Detector
XC6102 Voltage Detector

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XC6501 ETR03037-014b 200mA High Speed LDO Regulator, Output Capacitor-Less, Low Power Consumption ■GENERAL DESCRIPTION The XC6501 series is a high speed, low noise CMOS LDO regulator that can provide stable output voltages even without a load capacitor CL. This is possible because phase compensation is carried out internally unlike other LDOs where it is done externally. The series consists of a reference voltage source, driver transistor, error amplifier, current limit circuit, and phase compensation circuit. The CE function enables the circuit to be put into stand-by mode by inputting a low level signal to the CE pin thereby reducing current consumption from an already low 13μA (in operation) to less than 0.1μA.