Datasheet4U Logo Datasheet4U.com

TB6598FN - Dual Full-Bridge Driver

General Description

1 Output 2 (Ch.

Ch.

Winding current detection pin (Ch.

Key Features

  • Motor supply voltage: VM ≤ 15 V (max).
  • Control supply voltage: VCC = 2.7 V to 6 V Weight: 0.07 g (typ. ).
  • Output current: Iout ≤ 0.8 A (max).
  • Low ON-resistance: 1.5 Ω (upper side + lower side typ. @ VM = 5 V).
  • Constant-current control (PWM chopper drive).
  • Standby (power-saving) mode.
  • On-chip thermal shutdown circuit (TSD).
  • Compact package: SSOP-16 TB6598FNG: TB6598FNG is a Pb-free product. The following conditions.

📥 Download Datasheet

Datasheet Details

Part number TB6598FN
Manufacturer Toshiba
File Size 319.88 KB
Description Dual Full-Bridge Driver
Datasheet download datasheet TB6598FN Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TB6524FN DC MOTOR DUAL FULL BRIDGE DRIVER Toshiba Semiconductor
TB6552F DUAL-BRIDGE DRIVER IC FOR DC MOTORS Toshiba Semiconductor
TB6552FL DUAL-BRIDGE DRIVER IC FOR DC MOTORS Toshiba Semiconductor
TB6552FN DUAL-BRIDGE DRIVER IC FOR DC MOTORS Toshiba Semiconductor
TB6552FNG Dual-Bridge Driver Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TB6598FNG Dual Full-Bridge Driver
TB6590FTG Dual DC Motor Driver
TB6592FL Dual-Bridge Driver IC
TB6593FNG Driver IC
TB6596FLG DC and Stepping Motor Driver IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TB6598FN/FNG TENTATIVE TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB6598FN/FNG Dual Full-Bridge Driver for Stepping Motors The TB6598FN/FNG is a 2-phase bipolar stepping motor driver employing an LDMOS structure with low ON-resistance for output drive transistors. By applying four input signals (EN1, EN2, IN1, IN2), it is possible to control the rotation direction (forward/reverse) of 2-phase/1-2-phase stepper motor. It is also possible to achieve constant-current drive (PWM chopper drive). Features • Motor supply voltage: VM ≤ 15 V (max) • Control supply voltage: VCC = 2.7 V to 6 V Weight: 0.07 g (typ.) • Output current: Iout ≤ 0.8 A (max) • Low ON-resistance: 1.5 Ω (upper side + lower side typ.