TB6596FLG
Features
- Motor power supply voltage: VM ≤ 6 V (max)
- Control power supply voltage: VCC = 3 to 6 V
- Output current: IOUT ≤ 0.8 A (max)
- plementary P- and N-channel LDMOS output transistors
- Output ON-resistance: Ron (upper and lower sum) = 1.5 Ω (typ.)
Weight: 0.08 g (typ.)
Channel E: DC Motor Driver
- High-speed PWM control at several hundred k Hz
- Motor control method can be selected from the following two with the serial data inputs:
1. Controls motor speed by using both a frequency-locked-loop (FLL) speed discriminator that pares the FG and CLK signals, and an integrator. (Typical speed = Between 250 Hz and 1750 Hz in 16 steps.)
2. Controls H-bridge by using a direct PWM input.
- Two power switching transistors for optical encoder
Channel A and B or Channel C and D: Stepping Motor Driver
- Four H-bridge drivers (channel A and B, channel C and D) for direct PWM control.
(Capable of controlling up to two 2-phase bipolar stepping motors or four DC motors.)
Channel F: Shutter...
