Datasheet4U Logo Datasheet4U.com

TB6598FN - Dual Full-Bridge Driver

Description

1 Output 2 (Ch.

Ch.

Winding current detection pin (Ch.

Features

  • Motor supply voltage: VM ≤ 15 V (max).
  • Control supply voltage: VCC = 2.7 V to 6 V Weight: 0.07 g (typ. ).
  • Output current: Iout ≤ 0.8 A (max).
  • Low ON-resistance: 1.5 Ω (upper side + lower side typ. @ VM = 5 V).
  • Constant-current control (PWM chopper drive).
  • Standby (power-saving) mode.
  • On-chip thermal shutdown circuit (TSD).
  • Compact package: SSOP-16 TB6598FNG: TB6598FNG is a Pb-free product. The following conditions.

📥 Download Datasheet

Datasheet preview – TB6598FN

Datasheet Details

Part number TB6598FN
Manufacturer Toshiba
File Size 319.88 KB
Description Dual Full-Bridge Driver
Datasheet download datasheet TB6598FN Datasheet
Additional preview pages of the TB6598FN datasheet.

📁 Similar Datasheet

  • TB6524FN - DC MOTOR DUAL FULL BRIDGE DRIVER (Toshiba Semiconductor)
  • TB6552F - DUAL-BRIDGE DRIVER IC FOR DC MOTORS (Toshiba Semiconductor)
  • TB6552FL - DUAL-BRIDGE DRIVER IC FOR DC MOTORS (Toshiba Semiconductor)
  • TB6552FN - DUAL-BRIDGE DRIVER IC FOR DC MOTORS (Toshiba Semiconductor)
  • TB6552FNG - Dual-Bridge Driver (Toshiba Semiconductor)
  • TB6552FTG - Dual-Bridge Driver (Toshiba Semiconductor)
  • TB6556F - 3-Phase Full-Wave Sine-Wave PWM Brushless Motor Controller (Toshiba Semiconductor)
  • TB6559FG - Full-Bridge DC Motor Driver IC (Toshiba Semiconductor)
  • TB6560-3N - the Stepper Motor Driver Board User Manual (ETC)
  • TB6560FG - PWM Chopper-Type bipolar Stepping Motor Driver (Toshiba Semiconductor)
Other Datasheets by Toshiba

Full PDF Text Transcription

Click to expand full text
TB6598FN/FNG TENTATIVE TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB6598FN/FNG Dual Full-Bridge Driver for Stepping Motors The TB6598FN/FNG is a 2-phase bipolar stepping motor driver employing an LDMOS structure with low ON-resistance for output drive transistors. By applying four input signals (EN1, EN2, IN1, IN2), it is possible to control the rotation direction (forward/reverse) of 2-phase/1-2-phase stepper motor. It is also possible to achieve constant-current drive (PWM chopper drive). Features • Motor supply voltage: VM ≤ 15 V (max) • Control supply voltage: VCC = 2.7 V to 6 V Weight: 0.07 g (typ.) • Output current: Iout ≤ 0.8 A (max) • Low ON-resistance: 1.5 Ω (upper side + lower side typ.
Published: |