Datasheet4U Logo Datasheet4U.com

TB9101FNG - 2ch H-Bridge driver

General Description

TB9101FNG build-in 2 H-Bridge.

These 2 H-Bridge is controlled by Input DI1A/DI1B DI2A/DI2B, independently.

The operation modes are as follows.

Motor Operation 1 Input DI1A / DI2A DI1B / DI2B H H H L L H L L Output M +1 / M+2 M -1 / M-2 L L H L L

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TB9000AFG 5V Voltage Regulator Toshiba Semiconductor
TB9000F 5V VOLTAGE REGULATOR Toshiba Semiconductor
TB9001FN 5V Voltage Regulator Toshiba Semiconductor
TB9001FNG 5V Voltage Regulator Toshiba Semiconductor
TB9006FG Dual Voltage Regulator Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TB9102FNG 3ch H-bridge / 6ch Half-bridge driver
TB9120AFTAG Bipolar stepping motor driver
TB9120AFTG Bipolar stepping motor driver
TB9005FNG 5V Voltage Regulator
TB9032FNG Automotive CXPI communication driver receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TOSHIBA Bi-CMOS Linear Integrated Circuit Silicon Monolithic TB9101FNG TB9101FNG 2ch H-Bridge driver for DC Brushed Motor TB9101FNG is a 2ch H-bridge driver which is designed specifically for Automotive. This IC has built-in for directly driving small DC Brushed motor. Forward/Reverse/Stop/Brake can be set by Input signal (DI1A,DI1B,DI2A,DI2B). These Inputs are TTL, thus, TB9101FNG can be controlled by external MCU, directory. Standby mode, Miscellaneous Abnormal Detection are built-in. TB9101FNG is for wide application such as for Automotive Air-condition system (Dumper control), Door Mirror control. SSOP24-P-300-0.65A Weight: 0.14 g (typ.) Feature ··Motor Driver : 2ch H-Bridge with Driver (Directry drive external Motor) RON: RHON(Pch)=0.6Ω(typ.), RLON(Nch)=0.6Ω(typ.