TLP2398 Datasheet | Toshiba

Features (1) Inverter logic type (totem pole output) (2) Package: SO6 (3) Supply voltage: 3 to 20 V (4) Threshold input current, high to low: IFHL = ±2.3 m A (max) (5) Propagation delay time: 250 ns (max) (6) Pulse width distortion: 80 ns (max) (7) mon-mode transient immunity: ±20 k V/µs (min) (8) Operating temperature: -40 to 125  (9) Isolation voltage: 3750 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 c UL-approved: CSA ponent Acceptance Service No.5A File No.E67349 VDE-approved: EN60747-5-5, EN60065 or EN60950-1 (Note 1) CQC-approved: GB4943.1, GB8898 Thailand Factory Note 1: When a VDE approved type is needed, please designate the Option (V4). ©2016 Toshiba Corporation Start of mercial production 2013-03 2016-01-19 Rev.6.0 4. Packaging and Pin Assignment 11-4L1S 5. Internal Circuit (Note) 1: Anode/Cathode 3: Cathode/Anode 4: GND 5: VO(output) 6: VCC Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4. 6. Principle of Operation 6.1. Truth Table Input H L LED ON OFF Output L H 6.2. Mechanical Parameters Characteristics Creepage distances Clearance Internal isolation thickness Min Unit 5.0 mm ©2016 Toshiba Corporation 2016-01-19 Rev.6.0 7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 ) Characteristics Symbol Note Rating Unit LED Input forward current Input forward current derating (Ta ≥ 110 ) IF ∆IF/∆Ta ±20 -0.33 m A m A/ Peak transient input forward...