Photocouplers Photorelay
TLP241A,TLP241AF
TLP241A,TLP241AF
1. Applications
• Mechanical relay replacements
• Security Systems
• Measuring Instruments
• Factory Automation (FA)
• Amusement Equipment
• Smart Meters
• Electricity Meters
2. General
The TLP241A and TLP241AF photorelay consist of a photo MOSFET optically coupled to an infrared LED. They
are housed in a 4-pin DIP package. They provide an isolation voltage of 5000 Vrms, making them suitable for
applications that require reinforced insulation.
3. Features
(1) Halogen-free
For details, see "Devices in Halogen-Free Resin Packages" at the end of this datasheet.
(2) Normally opened (1-Form-A)
(3) OFF-state output terminal voltage: 40 V (min)
(4) Trigger LED current: 3 mA (max)
(5) ON-state current: 2.0 A (max)
(6) ON-state resistance: 100 mΩ (max, t < 1 s)
150 mΩ (max, Continuous)
(7) Isolation voltage: 5000 Vrms (min)
(8) Safety standards
UL-recognized: UL 1577, File No.E67349
cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349
UL-recognized: UL 508, File No.E499232 (Note 1)
VDE-approved: EN 60747-5-5, EN 62368-1 (Note 2)
Note 1: Please refer Absolute Maximum Ratings (UL-recognized UL 508) for UL 508 products.
Note 2: When an EN 60747-5-5 approved type is needed, please designate the Option (D4).
4. Mechanical Parameters
Characteristics
Creepage distances
Clearance distances
Internal isolation thickness
7.62-mm Pitch
TLP241A
7.0 (min)
7.0 (min)
0.4 (min)
10.16-mm Pitch
TLP241AF
Unit
8.0 (min)
mm
8.0 (min)
0.4 (min)
©2016-2020
Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2015-09
2020-02-17
Rev.7.0