TMP91C829 Datasheet | Toshiba

Features TMP91C829 is a high-speed 16-bit microcontroller designed for the control of various mid- to large-scale equipment.With 2 Kbytes of boot ROM included, it allows your programs to be erased and rewritten on board. TMP91C829FG es in a 100-pin flat package. Listed below are the features . (1) High-speed 16-bit CPU (900/L1 CPU) - Instruction mnemonics are upward patible with TLCS-90/900 - 16 Mbytes of linear address space - General-purpose registers and register banks - 16-bit multiplication and division instructions; bit transfer and arithmetic instructions - Micro DMA: 4 channels (444 ns/2 bytes at 36 MHz) (2) Minimum instruction execution time: 111 ns (at 36 MHz) (3) Built-in RAM: 8 Kbytes Built-in ROM: None Built-in Boot ROM: 2 Kbytes 91C829-1 2006-03-15 (4) External memory expansion - Expandable up to 16 Mbytes (Shared program/data area) - Can simultaneously support 8-/16-bit width external data bus … Dynamic data bus sizing (5) 8-bit timers: 6 channels (6) 16-bit timer/event counter: 1 channel (7) Serial bus interface: 2 channels (8) 10-bit AD converter: 8 channels (9) Watchdog timer (10) Chip select/wait controller: 4 blocks (11) Interrupts: 35 interrupts - 9 CPU interrupts: Software interrupt instruction and illegal instruction - 19 internal interrupts: 7 priority levels are selectable - 7 external interrupts: 7 priority levels are selectable (Level mode, rising edge mode and falling edge mode are selectable.) (12) Input/output ports: 46 pins (Except Data bus (8bit), Address bus (16bit) and RD pin) (13) Standby function Three HALT modes: IDLE2 (Programmable), IDLE1, STOP (14) Operating voltage - VCC (5 V) = 4.75 V to 5.25 V (fc max = 36 MHz) - VCC (3 V) = 3.0 V to 3.6 V (fc max = 36 MHz) (15) Package - 100-pin QFP: P-LQFP100-1414-0.50F Power on and power off the supply Power on and power off of the supply require the simultaneous execution of the 5 V...