SW65-0314 Datasheet | Tyco Electronics

Features n n n n n n n n Typical Isolation: 33 d B (2,000 MHz) Typical Insertion Loss: 1.6 d B (2,000 MHz) Integral ASIC TTL/CMOS Driver Plastic, 50 mil Pitch, SOW-24 Lead, Wide Body Low DC Power Consumption 50 Ohm Nominal Impedance Tape and Reel Packaging Available Test Boards Available Description M/A-'s SW65-0314 is a Ga As MMIC absorptive SP4T switch with an integral silicon ASIC driver. This device is in a 24-lead plastic package. This switch offers excellent broadband performance and repeatability from DC to 3 GHz, while maintaining low DC power dissipation. The SW65-0314 is ideally suited for wireless infrastructure applications. Also available in a ceramic package with improved performance. Package outline conforms to JEDEC standard MS-013AD. Electrical Specifications: TA = 25°C Parameter Insertion Loss Test Conditions DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz 10%/90%, 90%/10% 1 50% TTL to 90%/10% RF In-band (peak to peak) .05 GHz .5 - 3.0 GHz Two tone inputs 0.05 GHz Up to +5 d Bm 0.5 - 3.0 GHz - - VCC = +5.0V VEE = -5.0V Iin = 20 µA max Iin = 20 µA max Units d B d B d B d B d B d B - - - n S n S m V d Bm d Bm d Bm d Bm V V m A m A V V Min - - - 35 30 25 - - - - - - - - - - +4.5 -8.0 - - 0.0 2.0 On 1.3:1 1.5:1 1.7:1 15 50 50 +20 +27 +35 +46 +5.0 -5.0 0.2 -0.2 - - Typical 1.5 1.6 2.0 38 33 27 Off 1.3:1 1.7:1 2.2:1 Max 1.7 1.8 2.3 - - - 1.5:1 2.0:1 2.4:1 50 150 150 - - - - +5.5 -4.75 6 -1 0.8 5.0 Isolation (All arms off) VSWR Trise Tfall Ton Toff Transients 1 d B pression Input IP3 VCC VEE ICC IEE Logic “0” Logic “1” 1. Decoupling capacitors (.01 µF) are required on the power supply lines. Ga As SP4T Absorptive Switch with ASIC Driver, DC - 3.0...