Datasheet4U Logo Datasheet4U.com

UC2306 - MICROPOWER DC/DC CONVERTERS

Description

The UTC UC2306 is a step-up DC/DC converter which operate from a wide input supply range of 1.5V to 8V.

Its peak switch current can be reduced by adding a single resistor at the ILIM pin.

It is an ideal for use in small, low voltage, battery-operated systems.

Features

  • S.
  • In shutdown mode:10μA quiescent current.
  • Low battery detector active.
  • Minimum Operating Voltage: 1.5V.
  • Very Low VCESAT: 370mV@1A (typ).
  • In active mode :120μA quiescent current.
  • Only by one resistor: peak current is programmable.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UC23 Chip Mica Capacitor 3.2x2.5 size Soshin
UC2000D HIGH PRECISION LOW COST MCM POWER SWITCH UTC
UC250-F77-IU-IO-V31 Ultrasonic sensor Pepperl+Fuchs
UC2524 ADVANCED REGULATING PULSE WIDTH MODULATORS Texas Instruments
UC2524A ADVANCED REGULATING PULSE WIDTH MODULATORS Unitrode

Other Datasheets by Unisonic Technologies

Part Number Description
UC2843B HIGH-PERFORMANCE CURRENT-MODE PWM CONTROLLERS
UC2844 HIGH PERFORMANCE CURRENT MODE PWM CONTROLLERS
UC2845 HIGH PERFORMANCE CURRENT MODE PWM CONTROLLERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UC2306 LINEAR INTEGRATED CIRCUIT MICROPOWER DC/DC CONVERTERS WITH LOW-BATTERY DETECTOR ACTIVE IN SHUTDOWN DIP-8  DESCRIPTION The UTC UC2306 is a step-up DC/DC converter which operate from a wide input supply range of 1.5V to 8V. Its peak switch current can be reduced by adding a single resistor at the ILIM pin. It is an ideal for use in small, low voltage, battery-operated systems.  FEATURES *In shutdown mode:10μA quiescent current. *Low battery detector active *Minimum Operating Voltage: 1.5V *Very Low VCESAT: 370mV@1A (typ). *In active mode :120μA quiescent current. *Only by one resistor: peak current is programmable.
Published: |