ILD217T
ILD217T is Optocoupler manufactured by Vishay.
DESCRIPTION
The ILD217T are optically coupled pairs with a Ga As infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD217T e in a standard SOIC-8 small outline package for surface mounting which makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices.
The high BVCEO of 70 V gives a higher safety margin pared to the industry standard of 30 V.
FEATURES
- Two channel coupler
- SOIC-8 surface mountable package
- Standard lead spacing of 0.05"
- Available only on tape and reel option
(conforms to EIA standard 481-2)
- Isolation test voltage, 4000 VRMS
- patible with dual wave, vapor phase and IR reflow soldering
- Material categorization: for definitions of pliance please see .vishay./doc?99912
AGENCY APPROVALS
- UL
- c UL
ORDERING INFORMATION
PART NUMBER
AGENCY CERTIFIED / PACKAGE
UL, c UL SOIC-8
CTR (%) 1 m A ≥ 100
SOIC-8 6.1 mm
Rev. 1.1, 19-Jul-2023
Document Number: 84268
For technical questions, contact: optocoupleranswers@vishay.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000
.vishay.
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Peak reverse voltage Peak pulsed...
