Qg (Max.) (nC)
VGS = 10 V
• Dynamic dV/dt Rating
• Repetitive Avalanche Rated
• Isolated Central Mounting Hole
• Fast Switching
• Ease of Paralleling
• Simple Drive Requirements
• Compliant to RoHS Directive 2002/95/EC
Third generation Power MOSFETs from Vishay provide the
designer with the best combination of fast switching,
ruggedized device design, low on-resistance and
The TO-247AC package is preferred for
commercial-industrial applications where higher power
levels preclude the use of TO-220AB devices. The
TO-247AC is similar but superior to the earlier TO-218
package because its isolated mounting hole. It also provides
greater creepage distances between pins to meet the
requirements of most safety specifications.
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
Continuous Drain Current
Pulsed Drain Currenta
Linear Derating Factor
Single Pulse Avalanche Energyb
Repetitive Avalanche Currenta
Repetitive Avalanche Energya
Maximum Power Dissipation
Peak Diode Recovery dV/dtc
VGS at 10 V
TC = 25 °C
TC = 100 °C
TC = 25 °C
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)
for 10 s
6-32 or M3 screw
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. VDD = 50 V, starting TJ = 25 °C, L = 40 mH, Rg = 25 , IAS = 6.1 A (see fig. 12).
c. ISD 6.1 A, dI/dt 120 A/μs, VDD 600, TJ 150 °C.
d. 1.6 mm from case.
- 55 to + 150
lbf · in
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 91254
S11-0441-Rev. B, 14-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000