DG2016 Datasheet | Vishay

DESCRIPTION The DG2016/DG2026 are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage, high bandwidth applications. The DG2016/DG2026’s on-resistance (3  at 2.7 V), matching and flatness are guaranteed over the entire analog voltage range. Wide dynamic performance is achieved with better than - 80 d B for both cross-talk and off-isolation at 1 MHz. Both SPDT’s operate with independent control logic, conduct equally well in both directions and block signals up to the power supply level when off. Break-before-make is guaranteed. With fast switching speeds, low on-resistance, high bandwidth, and low charge injection, the DG2016/DG2026 are ideally suited for audio and video switching with high linearity. Built on Vishay Siliconix’s low voltage CMOS technology, the DG2016/DG2026 contain an epitaxial layer which prevents latch-up FEATURES - Halogen-free according to IEC 61249-2-21 Definition - Single Supply (1.8 V to 5.5 V) - Low On-Resistance - RON: 2.4  - Crosstalk and Off Isolation: - 81 d B at 1 MHz - MSOP-10 Package - pliant to Ro HS Directive 2002/95/EC BENEFITS - Reduced Power Consumption - High Accuracy - Reduce Board Space - Low-Voltage Logic patible - High Bandwidth APPLICATIONS - Cellular Phones - Speaker Headset Switching - Audio and Video Signal Routing - PCMCIA Cards - Low-Voltage Data Acquisition - ATE FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG2016DQ - MSOP-10 IN1 NO1 GND NO2 IN2 1 2 3 4 5 10 1 9 NC1 8 V+ 7 NC2 6 2 TRUTH TABLE Logic NC1 and NC2 0 ON 1 OFF NO1 and NO2 OFF ON Top...