Datasheet Details
| Part number | 74AC11244 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 844.59 KB |
| Description | OCTAL BUFFER/DRIVER |
| Download | 74AC11244 Download (PDF) |
|
|
| Part number | 74AC11244 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 844.59 KB |
| Description | OCTAL BUFFER/DRIVER |
| Download | 74AC11244 Download (PDF) |
|
|
|
The 74AC11244 is an octal buffer or line driver designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
The device can be used as two 4-bit buffers or one 8-bit buffer, with active-low output-enable (OE) inputs.
When OE is low, the device passes noninverted data from the A inputs to the Y outputs.
D EPIC™ (Enhanced-Performance Implanted CMOS ) 1-µm Process D 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers D Flow-Through Architecture Optimizes PCB Layout D Center-Pin VCC and GND.
| Part Number | Description |
|---|---|
| 74AC11240 | OCTAL BUFFER/LINE DRIVER |
| 74AC11241 | OCTAL BUFFERS/LINE DRIVERS |
| 74AC11245 | OCTAL BUS TRANSCEIVER |
| 74AC11238 | 3-Line to 8-Line Decoders/Demultiplecers |
| 74AC11239 | DUAL 2-LINE TO 4-LINE DECODER/DEMULTIPLEXER |
| 74AC11251 | 1-OF-8 DATA SELECTOR/MULTIPLEXER |
| 74AC11253 | DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS |
| 74AC11257 | QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER |
| 74AC11258 | QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER |
| 74AC11273 | OCTAL D-TYPE FLIP-FLOP |