MSP430FR5967
Overview
- Embedded Microcontroller - 16-Bit RISC Architecture up to 16‑MHz Clock - Wide Supply Voltage Range From 3.6 V Down to 1.8 V (Minimum Supply Voltage is Restricted by SVS Levels, See the SVS Specifications)
- Optimized Ultra-Low-Power Modes - Active Mode: Approximately 100 µA/MHz - Standby (LPM3 With VLO): 0.4 µA (Typical) - Real-Time Clock (LPM3.5): 0.25 µA (Typical) (1) - Shutdown (LPM4.5): 0.02 µA (Typical)
- Ultra-Low-Power Ferroelectric RAM (FRAM) - Up to 64KB of Nonvolatile Memory - Ultra-Low-Power Writes - Fast Write at 125 ns Per Word (64KB in 4 ms) - Unified Memory = Program + Data + Storage in One Single Space - 1015 Write Cycle Endurance - Radiation Resistant and Nonmagnetic
- Intelligent Digital Peripherals - 32-Bit Hardware Multiplier (MPY) - 3-Channel Internal DMA - Real-Time Clock (RTC) With Calendar and Alarm Functions - Five 16-Bit Timers With up to Seven Capture/Compare Registers Each - 16-Bit Cyclic Redundancy Checker (CRC)
- High-Performance Analog - 16-Channel Analog Comparator - 12-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and-Hold and up to 16 External Input Channels
- Multifunction Input/Output Ports - All Pins Support Capacitive Touch Capability With No Need for External Components (1) RTC is clocked by a 3.7-pF crystal. - Accessible Bit-, Byte-, and Word-Wise (in Pairs) - Edge-Selectable Wake From LPM on All Ports - Programmable Pullup and Pulldown on All Ports
- Code Security and Encryption - 128-Bit or 256-Bit AES Security Encryption and Decryptio
