| Part number | SN54F74 |
|---|---|
| Datasheet | SN54F74-etcTI.pdf |
| File Size | 1.15 MB |
| Manufacturer | Texas Instruments |
| Description | DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS |
|
|
These devices contain two independent positiveedge-triggered D-type flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse.
See all Texas Instruments datasheets
| Part Number | Description |
|---|---|
| SN54F74J | DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS |
| SN54F00 | QUADRUPLE 2-INPUT POSITIVE-NAND GATES |
| SN54F02 | QUADRUPLE 2-INPUT POSITIVE-NOR GATES |
| SN54F04 | HEX INVERTERS |
| SN54F10 | TRIPLE 3-INPUT POSITIVE-NAND GATE |
| SN54F109 | DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOP |
| SN54F11 | Triple 3-Input AND Gate |
| SN54F138 | 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS |
| SN54F151B | 1-of-8 Data Selector/Multiplexer |
| SN54F153 | Dual 1-of-4 Data Selectors/Multiplexer |
