Datasheet4U Logo Datasheet4U.com

SN74F175 - QUADRUPLE D-TYPE FLIP-FLOP

Description

This positive-edge-triggered flip-flop utilizes TTL circuitry to implement D-type flip-flop logic with a direct clear (CLR) input.

Information at the data (D) inputs meeting setup-time requirements is transferred to outputs on the positive-going edge of the clock pulse.

📥 Download Datasheet

Datasheet preview – SN74F175

Datasheet Details

Part number SN74F175
Manufacturer Texas Instruments
File Size 887.63 KB
Description QUADRUPLE D-TYPE FLIP-FLOP
Datasheet download datasheet SN74F175 Datasheet
Additional preview pages of the SN74F175 datasheet.

📁 Similar Datasheet

  • SN74101 - AND-OR Gate (ETC)
  • SN74102 - AND Gate (ETC)
  • SN74103 - Dual J-K Flip-Flop (ETC)
  • SN74106 - Dual J-K Flip-Flop (ETC)
  • SN74108 - Dual J-K Flip Flop (ETC)
  • SN7411 - Triple 3-Input AND (ETC)
  • SN74120 - Dual Pulse Synchronizers / Drivers (Texas Instruments Inc)
  • SN74124 - Dual Voltage Controlled Oscillators (ETC)
  • SN7415 - Triple 3 Input AND Gate (Motorola)
  • SN74381 - integrated circuits (ETC)
Other Datasheets by Texas Instruments
  • SN74F174A - HEX D-TYPE FLIP-FLOP
  • SN74F10 - TRIPLE 3-INPUT POSITIVE-NAND GATE
  • SN74F1016 - 16-Bit Schottky Barrier Diode RC Bus-Termination Array
  • SN74F1056 - 8-BIT SCHOTTKY BARRIER DIODE BUS-TERMINATION ARRAY
  • SN74F109 - DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOP
  • SN74F11 - Triple 3-Input AND Gate
  • SN74F112 - DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP
  • SN74F125 - QUADRUPLE BUS BUFFER GATE

Full PDF Text Transcription

Click to expand full text
D Contains Four Flip-Flops With Double-Rail Outputs D Buffered Clock and Direct Clear Inputs D Applications Include: – Buffer/Storage Registers – Shift Registers – Pattern Generators description This positive-edge-triggered flip-flop utilizes TTL circuitry to implement D-type flip-flop logic with a direct clear (CLR) input. Information at the data (D) inputs meeting setup-time requirements is transferred to outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock (CLK) input is at either the high or low level, the D-input signal has no effect at the output.
Published: |