The SN74LV8153 is a serial-to-parallel data converter.
It accepts serial input data and outputs 8-bit parallel data.
The automatic data-rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real-estate savings.
Full PDF Text Transcription for SN74LV8153-Q1 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
SN74LV8153-Q1. For precise diagrams, and layout, please refer to the original PDF.
www.ti.com DESCRIPTION The SN74LV8153 is a serial-to-parallel data converter. It accepts serial input data and outputs 8-bit parallel data. The automatic data-rate detect...
View more extracted text
t data and outputs 8-bit parallel data. The automatic data-rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real-estate savings. The OUTSEL pin is used to choose between open collector and push-pull outputs. The open-collector option is suitable when this device is used in applications such as LED interface, where high drive current is required. SOUT is the output that acknowledges reception of the serial data. To ensure the high-impedance state during power up or power down, OE should be tied to VCC1 through a pullup resistor; the minimum value of the re
SN74LV8153-Q1 Datasheet
