Datasheet4U Logo Datasheet4U.com

TLV61225 - Single-Cell High-Efficient Step-Up Converter

Description

The TLV61225 device provides a power-supply solution for products powered by either a single-cell or 2-cell alkaline or NiMH, or 1-cell Li-primary battery.

Possible output currents depend on the input-tooutput voltage ratio.

Features

  • 1 Up to 94% Efficiency at Typical Operating Conditions.
  • 5-μA Quiescent Current.
  • Operating Input Voltage from 0.7 V to 3.3 V.
  • Pass-Through Function During Shutdown.
  • Output Current of More Than 40-mA From a 1.2-V Input.
  • Typical Switch Current Rating 400 mA.
  • Output Overvoltage Protection.
  • Overtemperature Protection.
  • Fixed 3.3-V Output Voltage.
  • Small 6-Pin SC-70 Package 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TLV271 Operational Amplifier ON Semiconductor
TLV271 CMOS RAIL TO RAIL OUTPUT OPERATIONAL AMPLIFIERS Diodes
TLV272 Operational Amplifier ON Semiconductor
TLV272 CMOS RAIL TO RAIL OUTPUT OPERATIONAL AMPLIFIERS Diodes
TLV274 Operational Amplifier ON Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TLV61220 Low-Input Voltage Step-Up Converter
TLV61224 Single-Cell High-Efficient Step-Up Converter
TLV61046A 28-V Output Voltage Boost Converter
TLV61047 2.2A Non-synchronous Boost Converter
TLV61048 14-V Output Voltage Non-synchronous Boost Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TLV61225 SLVSAF0A – AUGUST 2010 – REVISED MAY 2015 TLV61225 Single-Cell High-Efficient Step-Up Converter in 6-Pin SC-70 Package 1 Features •1 Up to 94% Efficiency at Typical Operating Conditions • 5-μA Quiescent Current • Operating Input Voltage from 0.7 V to 3.3 V • Pass-Through Function During Shutdown • Output Current of More Than 40-mA From a 1.2-V Input • Typical Switch Current Rating 400 mA • Output Overvoltage Protection • Overtemperature Protection • Fixed 3.
Published: |