Datasheet4U Logo Datasheet4U.com

LN1136 - 300mA Low Dropout

Description

The LN1136 series are highly precise, low noise, positive voltage LDO regulators with power-ok indicators manufactured using CMOS processes.

Features

  • ut Voltage Range: 1.2V to 6.0V (selectable in 500mV steps).
  • Highly Accurate : ± 2%.
  • Dropout Voltage: 200mV @ 100mA (3.0V type).
  • Power-ok indicates: active when the output reached 95% of the normal output voltage.
  • High Ripple Rejection: 70dB (10 kHz).
  • Low Power Consumption: 25μA (TYP. ).
  • Maximum Output Current : 300mA（VIN≥VOUT+1V）.
  • Standby Current : less than 0.1μA.
  • Internal protector: current limiter and short protector.
  • Small packages: SOT-23-5 and ot.

📥 Download Datasheet

Datasheet Details

Part number LN1136
Manufacturer natlinear
File Size 249.32 KB
Description 300mA Low Dropout
Datasheet download datasheet LN1136 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LN113006 General Purpose Relays TE
LN113009 General Purpose Relays TE
LN113012 General Purpose Relays TE
LN113024 General Purpose Relays TE
LN113036 General Purpose Relays TE

Other Datasheets by natlinear

Part Number Description
LN1130 High Ripple-Rejection Low Dropout CMOS Voltage Regulator
LN1131 300mA Low Dropout CMOS Voltage Regulators
LN1132 300mA Low Dropout CMOS Voltage Regulators
LN1134 High Speed Low Dropout Middle Current Voltage Regulators
LN1138 300mA Low Dropout Anti Back Irrigation CMOS Voltage Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LN1136 300mA Low Dropout with Power_OK CMOS Voltage Regulators ■ General Description The LN1136 series are highly precise, low noise, positive voltage LDO regulators with power-ok indicators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 50mV increments within a range of 1.2V ~ 6.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series.
Published: |