Datasheet4U Logo Datasheet4U.com

74AUP1G09-Q100 - Low-power 2-input AND gate

Description

The 74AUP1G09-Q100 is a single 2-input AND gate with open-drain output.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

This device ensures very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 0.8 V to 3.6 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Overvoltage tolerant inputs to 3.6 V.
  • Low static power consumption; ICC = 0.9 μA (maximum).
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Low noise overshoot and undersho.

📥 Download Datasheet

📁 Similar Datasheet

  • 74AUP1G09 - Low-power 2-input AND Gate (NXP)
  • 74AUP1G09 - SINGLE 2 INPUT POSITIVE AND GATE (Diodes)
  • 74AUP1G00 - Low-power 2-input NAND gate (NXP Semiconductors)
  • 74AUP1G00 - SINGLE 2 INPUT POSITIVE NAND GATE (Diodes)
  • 74AUP1G02 - Low-power 2-input NOR gate (NXP)
  • 74AUP1G02 - SINGLE 2 INPUT POSITIVE NOR GATE (Diodes)
  • 74AUP1G04 - Low-power inverter (NXP Semiconductors)
  • 74AUP1G04 - Low power single inverter gate (STMicroelectronics)
  • 74AUP1G04 - SINGLE INVERTER GATE (Diodes)
  • 74AUP1G06 - Low-power inverter (NXP Semiconductors)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74AUP1G09-Q100 Low-power 2-input AND gate with open-drain Rev. 3 — 14 January 2022 Product data sheet 1. General description The 74AUP1G09-Q100 is a single 2-input AND gate with open-drain output. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device ensures very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |