Datasheet4U Logo Datasheet4U.com

74AUP2G04-Q100 - Low-power dual inverter

Description

The 74AUP2G04-Q100 is a dual inverter.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

This device ensures very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 0.8 V to 3.6 V.
  • High noise immunity.
  • Complies with JEDEC standards:.
  • JESD8-12 (0.8 V to 1.3 V).
  • JESD8-11 (0.9 V to 1.65 V).
  • JESD8-7 (1.2 V to 1.95 V).
  • JESD8-5 (1.8 V to 2.7 V).
  • JESD8-B (2.7 V to 3.6 V).
  • ESD protection:.
  • MIL-STD-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74AUP2G04 Low-power dual inverter NXP
74AUP2G04 DUAL INVERTERS Diodes
74AUP2G00 Low-power dual 2-input NAND gate NXP
74AUP2G00 DUAL NAND GATE Diodes
74AUP2G02 DUAL NOR GATE Diodes

Other Datasheets by Nexperia

Part Number Description
74AUP2G04 Low-power dual inverter
74AUP2G00 Low-power dual 2-input NAND gate
74AUP2G00-Q100 Low-power dual 2-input NAND gate
74AUP2G02 Low-power dual 2-input NOR gate
74AUP2G06 Low-power dual inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AUP2G04-Q100 Low-power dual inverter Rev. 3 — 31 January 2022 Product data sheet 1. General description The 74AUP2G04-Q100 is a dual inverter. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device ensures very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |