AAT3192 - (AAT3192 / AAT3193) 2-/3-Channel Charge-Pump LED Drivers

Datasheet Details

Part number	AAT3192
Manufacturer	AAT
File Size	599.28 KB
Description	(AAT3192 / AAT3193) 2-/3-Channel Charge-Pump LED Drivers
Datasheet	AAT3192_AAT.pdf

The AAT3192 and AAT3193 are charge-pump based, current-sink white LED drivers capable of driving one to three LEDs up to 30mA, each.

ChargePump™.
Drives up to 3 LEDs at up to 30mA, each Automatic Switching Between 1x and 2x Modes 0.9MHz Switching Frequency Linear LED Output Current Control.
Single-wire, S2Cwire Interface.
AAT3192/93-1: 16-step.
AAT3192/93-2: 8-step.
AAT3192/93-3: 4-step.
ON/OFF or PWM Interface.
AAT3192/93-4 ±10% LED Output Current Accuracy ±3% LED Output.

📁 AAT3192 Similar Datasheet

AAT3190 - Positive/Negative Charge Pump for Voltage Bias (ANALOGICTECH)
AAT3103 - 3-Channel Charge-Pump LED Driver (Advanced Analog Technology)
AAT3104 - Low Cost 1x/2x 4 Channel Charge Pump WLED Driver (Advanced Analogic Technologies)
AAT3105 - Low Cost 1x/2x Four-Channel Charge Pump WLED Driver (Skyworks)
AAT3110 - MicroPower Regulated Charge Pump (Advanced Analogic Technologies)
AAT3111 - MicroPower Regulated Charge Pump (Advanced Analogic Technologies)
AAT3113 - High Efficiency 1.5X Fractional Charge Pumps For White LED Applications (Advanced Analogic Technologies)
AAT3114 - High Efficiency 1.5X Fractional Charge Pumps (Skyworks Solutions)

Other Datasheets by AAT

Published: Jun 18, 2007 |