ADM4210 Datasheet - Analog Devices

Hot Swap Controller

ADM4210 Features

* Controls supply rails from 2.7 V to 16.5 V Allows protected board removal and insertion to a live backplane External sense resistor provides adjustable analog current limit with circuit breaker Peak fault current limited with fast response Charge pumped gate drive for external N-FET switch Automatic

ADM4210 General Description

The ADM4210 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An internal charge pump is u.

ADM4210 Datasheet (378.34 KB)