AP22815 - SINGLE CHANNEL POWER DISTRIBUTION SWITCH

Diodes

AP22815 Datasheet Preview — Preview of AP22815 PDF

Datasheet Details

Part number	AP22815
Manufacturer	DIODES ↗
File Size	665.86 KB
Description	SINGLE CHANNEL POWER DISTRIBUTION SWITCH
Datasheet	AP22815-Diodes.pdf

AP22815 Product details

Description

The AP22815/615 is a 3A single-channel current-limited high-side power switch with output OVP optimized for USB and other hot-swap applications, which must have overvoltage protection from output to protection the system.

Features

Input Voltage Range: 3.0V to 5.5V.
40mΩ On-Resistance.
Built-In Soft-Start with 2.1ms Typical Rise Time.
Fault Report (FLG) with Blanking Time (7ms Typ).
Accurate Adjustable Current Limit, 0.4A to 4.0A (AP22615 Only).
ESD Protection: 2kV HBM, 200V MM.
Active Low or Active High Enable.
Protection.
Output Overvoltage with Auto Recovery.
Overcurrent with Auto Recovery.
Short-Circuit with Auto Recovery.
Overtemperature with Auto Recovery.

📁 AP22815 Similar Datasheet

AP22816 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH (DIODES)
AP22817 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH (DIODES)
AP22818 - 1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH (DIODES)
AP2201 - RF ULDO REGULATOR (BCD Semiconductor)
AP2202 - RF ULDO REGULATOR (BCD Semiconductor)
AP2203 - RF ULDO REGULATOR (BCD Semiconductor)
AP220309 - 4A LOAD SWITCH (DIODES)
AP2204 - WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR (BCD Semiconductor)

Other Datasheets by Diodes

AP2281 - Single Slew Rate Controlled Load Switch
AP22811 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP22814 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH
AP2280 - Single Channel Slew Rate Controlled Load Switch
AP22800 - 5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH
AP22802 - SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Published: May 17, 2019 |