7 views

GM7001 Datasheet - Gamma Microelectronics

GM7001 Low-voltage Switching Regulator Controller

Error amplifier inverting input pin Soft start and SCP setting capacitor connection pin Power supply pin Output current setting and control pin Totem-pole type output pin Ground pin Capacitor and resistor connection pin for setting the oscillation frequency Error amplifier output pin Revision 1, Ma.

GM7001 www.DataSheet4U.com BIPOLAR LOW VOLTAGE SWITCHING REGULATOR CONTROLLER Supply voltage operating range from 1.8 to 15 V Low current consumption: 5.5 mA (typical) operating, 1 µA or less stand-by High speed operation up to 1 MHz Error amplifier gain is set in the chip to minimize peripheral components Soft-start circuit on-chip Timer-latch short-circuit detection circuit (SCP) on-chip Totem-pole output with adjustable on/off current for NPN transistors Stand-by function SOP-8, SOL-8 and S.

GM7001 Features

* PWM comparator The voltage comparator has one inverting and three non-inverting inputs. The comparator is a voltage/pulse-width converter that controls the ON time of the output pulse depending on the input voltage. The output level is high (H) when the sawtooth wave is lower than the error amplifi

GM7001 Datasheet (176.68 KB)