Datasheet4U Logo Datasheet4U.com

HD74LV240A - Octal Buffers / Drivers with 3-state Outputs

Datasheet Summary

Description

The HD74V240A has eight inverter drivers with three-state outputs in a 20-pin package.

Four inverters are included in one circuit.

Each circuit can be independently controlled by the enable signal 1OE or 2OE, which enables outputs when receiving a low-level signal.

Features

  • VCC = 2.0 V to 5.5 V operation All inputs VIH (Max. ) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max. ) = 5.5 V (@VCC = 0 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C) Output current ±8 mA (@VCC = 3.0 V to 3.6 V), ±16 mA (@VCC = 4.5 V to 5.5 V) Function Table Inputs OE L L H Note: H: L: X: Z: High level Low level Immaterial High impedance A H L X Output Y L H Z.

📥 Download Datasheet

Datasheet preview – HD74LV240A

Datasheet Details

Part number HD74LV240A
Manufacturer Hitachi Semiconductor
File Size 68.12 KB
Description Octal Buffers / Drivers with 3-state Outputs
Datasheet download datasheet HD74LV240A Datasheet
Additional preview pages of the HD74LV240A datasheet.

📁 Similar Datasheet

  • HD74LV240A - Octal Buffers / Drivers (Renesas)
  • HD74LV244A - Octal Buffers / Drivers (Renesas)
  • HD74LV245A - Octal Bus Transceivers (Renesas)
  • HD74LV20A - Dual 4-input Positive NAND Gates (Renesas)
  • HD74LV21A - Dual 4-input Positive AND Gates (Renesas)
  • HD74LV221A - Dual Monostable Multivibrators (Renesas)
  • HD74LV273A - Octal D-type Flip-Flops (Renesas)
  • HD74LV27A - Triple 3-input Positive NOR Gates (Renesas)
  • HD74LV2G00A - Dual 2-input NAND Gates (Renesas Technology)
  • HD74LV2G02A - Dual 2-input NOR Gates (Renesas Technology)
Other Datasheets by Hitachi Semiconductor

Full PDF Text Transcription

Click to expand full text
HD74LV240A Octal Buffers / Drivers with 3-state Outputs ADE-205-272 (Z) 1st Edition April 1999 Description The HD74V240A has eight inverter drivers with three-state outputs in a 20-pin package. Four inverters are included in one circuit. Each circuit can be independently controlled by the enable signal 1OE or 2OE, which enables outputs when receiving a low-level signal. Low-voltage operation is suitable for batterypowered products (e.g., notebook computers), and the low-power consumption extends the battery life. Features • • • • • • VCC = 2.0 V to 5.5 V operation All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.3 V (@VCC = 3.
Published: |