ISL75051SEH Datasheet PDF (Ultra-Low Dropout Regulator)

ISL75051SEH - Ultra-Low Dropout Regulator

Description

Input supply pins.

VOUT in regulation signal.

Logic low defines when VOUT is not in regulation.

Features

DLA SMD 5962-11212.
Output current up to 3.0A at TJ = +150°C.
Output accuracy ±1.5% over MIL temperature range.
Ultra low dropout: - 65mV (typical) dropout at 1.0A - 225mV (typical) dropout at 3.0A.
SET mitigation with no added filtering/diodes.
Input supply range: 2.2V to 6.0V.
Fast load transient response.
Shutdown current of 1µA (typical).
Output adjustable using external resistors.
PSRR 66dB (typical).

Datasheet Details

Part number	ISL75051SEH
Manufacturer	Intersil
File Size	941.83 KB
Description	Ultra-Low Dropout Regulator
Datasheet	ISL75051SEH Datasheet
Additional preview pages of the ISL75051SEH datasheet.

📁 Similar Datasheet

ISL70001SRH - Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator (Intersil Corporation)

ISL71090SEHF25 - Radiation Hardened Ultra Low Noise / Precision Voltage Reference (Intersil Corporation)

ISL7119RH - Radiation Hardened High Speed Dual Voltage Comparator (Intersil Corporation)

ISL7124SRH - Quad Operational Amplifiers (Intersil Corporation)

ISL72026SEH - 3.3V Radiation Tolerant CAN Transceiver (Intersil Corporation)

ISL72027SEH - 3.3V Radiation Tolerant CAN Transceiver (Intersil Corporation)

ISL72028SEH - 3.3V Radiation Tolerant CAN Transceiver (Intersil Corporation)

ISL72991RH - Radiation Hardened Negative Low Dropout Adjustable Voltage Regulator (Intersil Corporation)

ISL73096RH - Radiation Hardened Ultra High Frequency NPN/PNP Transistor (Intersil Corporation)

ISL73127RH - Radiation Hardened Ultra High Frequency NPN/PNP Transistor (Intersil Corporation)

Full PDF Text Transcription

Click to expand full text

NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART ISL75051ASEH ISL75051SEH, ISL75051SRH 3A, Radiation Hardened, Positive, Ultra-Low Dropout Regulator DATASHEET FN8294 Rev.7.00 May 22, 2017 The ISL75051SEH, ISL75051SRH are radiation hardened low-voltage, high-current, single-output LDOs specified for up to 3.0A of continuous output current. These devices operate over an input voltage range of 2.2V to 6.0V and are capable of providing output voltages of 0.8V to 5.0V adjustable, based on resistor divider setting. Dropout voltages as low as 65mV can be realized using the device. The OCP pin allows the short-circuit output current limit threshold to be programmed by means of a resistor from the OCP pin to GND. The OCP setting range is from 0.5A minimum to 8.5A maximum.

Published: Mar 30, 2017 |