SS8844T Datasheet - LEADPOWER

SS8844T Four-channel 1/2 H-bridge driver

chip-wise Chip on chip VM 4, H-bridge power supply V3P3OUT NC VCP Controls IN1 15 1,2,12,13 3 3.3V rectified output Undefined High side grid drive 27 1 Half bridge logic input EN1 26 1 Half bridge enable input IN2 25 2 Half bridge logic input EN2 24 2 Half bridge enable input IN3 .

PRODUCT OVERVIEW The SS8844T offers four independently controlled 1/2 H-bridge starters. It can be used to drive two DC motors, a stepper motor, four solenoids, or other loads. The output driver channel for each channel consists of an Nchannel power MOSFETs configured in a 1/2 Hbridge configuration. The SS8844T delivers up to 2.5A peak current or 1.75A root mean square (RMS) output current (with appropriate printed circuit board (PCB) heat dissipation at 24V and 25°C) on each bridge channel. The.

SS8844T Features

* Dual channel H-bridge current control motor driver - Single or two brushed DC motors

* One stepper motor - Fully independent half-bridge control

* Industry standard IN/IN digital control interface

* Metal oxide semiconductor field effect transistor (MOSFET) with low on-impedanc

SS8844T-LEADPOWER.pdf