NSD7310 - Brushed DC Motor Driver

NOVOSENSE

NSD7310 Datasheet Preview — Preview of NSD7310 PDF

Datasheet Details

Part number	NSD7310
Manufacturer	NOVOSENSE
File Size	1.05 MB
Description	Brushed DC Motor Driver
Datasheet	NSD7310-NOVOSENSE.pdf

NSD7310 Product details

Description

SYMBOL No TYPE DESCRIPTION GND 1 PWR Logic ground.Connect to board ground IN1 3 I Logic inputs 1. Controls the H-bridge output.Has internal pull downs.IN2 2 I Logic inputs 2. Controls the H-bridge output.Has internal pull downs.High-current ground path.If using current regulation, connect ISEN to a resistor (low-value, ISEN 7 PWR high-power-rating) to ground.If not using current regulation, connect ISEN directly to ground.OUT1 6 O H-bridge output1 pin.Connect directly to the moto

Features

sleep mode with low quiescent current when both IN1 and IN2 inputs are low. The device is integrated with current chopping regulation, depends on VREF input and the voltage of ISEN pin, which is proportional to current flowing through motor and an external sense resistor. The current chopping function limits the current during motor start-up or stall condition. The device is also fully protected from faults including VM undervoltage, overcurrent (output short to battery or short to GND) and over.

📁 NSD7310 Similar Datasheet

NSD-1202 - Dual Piezo Motor Driver IC (austriamicrosystems AG)
NSD-2101 - Piezo Motor Driver ASIC (austriamicrosystems AG)
NSD03A10 - DIODE (Nihon Inter Electronics)
NSD03A20 - DIODE (Nihon Inter Electronics)
nsd03a40 - Standard Recovery Diode (Nihon Inter Electronics)
NSD070AL - Switching Diode (ON Semiconductor)
NSD10-12D12 - DC-DC Converters (FranMar)
NSD10-12D15 - DC-DC Converters (FranMar)

Other Datasheets by NOVOSENSE

NSD7310A - Brushed DC Motor Driver
NSD7312 - Brushed DC Motor Driver
NSD7312A - Brushed DC Motor Driver
NSD1025-Q1 - Low-Side Gate Driver
NSD1624-Q1 - Half Bridge Gate Driver
NSD16241-Q1 - Half Bridge Gate Driver

Published: Aug 25, 2024 |