Datasheet4U Logo Datasheet4U.com

74HC4052 - Dual 4-channel analog multiplexer/demultiplexer

Datasheet Summary

Description

The 74HC4052; 74HCT4052 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications.

Features

  • Wide analog input voltage range from 5 V to +5 V.
  • Low ON resistance:.
  • 80  (typical) at VCC  VEE = 4.5 V.
  • 70  (typical) at VCC  VEE = 6.0 V.
  • 60  (typical) at VCC  VEE = 9.0 V.
  • Logic level translation: to enable 5 V logic to communicate with 5 V analog signals.
  • Typical ‘break before make’ built-in.
  • Complies with JEDEC standard no. 7A.
  • Input levels:.
  • For 74HC4052: CMOS level.
  • For 74HCT4052: TTL level.
  • ESD protection:.
  • HBM JES.

📥 Download Datasheet

Datasheet preview – 74HC4052

Datasheet Details

Part number 74HC4052
Manufacturer NXP
File Size 224.32 KB
Description Dual 4-channel analog multiplexer/demultiplexer
Datasheet download datasheet 74HC4052 Datasheet
Additional preview pages of the 74HC4052 datasheet.

📁 Similar Datasheet

  • 74HC4052 - Dual 4-channel analog multiplexer/demultiplexer (nexperia)
  • 74HC4052-Q100 - Dual 4-channel analog multiplexer/demultiplexer (nexperia)
  • 74HC4052D - Dual 4-Channel Analog Multiplexer/Demultiplexer (Toshiba)
  • 74HC4052D - Dual 4-channel analog multiplexer/demultiplexer (nexperia)
  • 74HC4052FT - Dual 4-Channel Analog Multiplexer/Demultiplexer (Toshiba)
  • 74HC4050 - Hex non-inverting HIGH-to-LOW level shifter (nexperia)
  • 74HC4050-Q100 - Hex non-inverting HIGH-to-LOW level shifter (nexperia)
  • 74HC4050D - Hex Buffer (Toshiba)
  • 74HC4050D - Hex non-inverting HIGH-to-LOW level shifter (nexperia)
  • 74HC4051 - 8-channel analog multiplexer/demultiplexer (nexperia)
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
74HC4052; 74HCT4052 Dual 4-channel analog multiplexer/demultiplexer Rev. 11 — 10 February 2016 Product data sheet 1. General description The 74HC4052; 74HCT4052 is a dual single-pole quad-throw analog switch (2x SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 and S1) are common to both switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2.
Published: |