Datasheet4U Logo Datasheet4U.com

P3T1755 - digital temperature sensor

Description

The P3T1755 is a temperature-to-digital converter from -40 °C to +125 °C range.

It uses an on-chip band gap temperature sensor and A-to-D conversion technique with an overtemperature detection.

Features

  • I3C (up to 12.5 MHz) and I2C (up to 3.4 MHz) interface.
  • 32 I2C target addresses.
  • 32 I3C Provisional-ID.
  • Supply range: 1.4 V to 3.6 V.
  • Programmable overtemperature alerts.
  • Resolution: 12 bits (0.0625 °C).
  • Accuracy:.
  • 1.4 V < VCC < 3.6 V.
  • ±0.5 °C (maximum) from.
  • 20 °C to +85 °C.
  • ±1 °C (maximum) from -40 °C to +125 °C.
  • Low quiescent current: 4.1 μA supply current (typical).
  • ESD protec.

📥 Download Datasheet

Datasheet preview – P3T1755

Datasheet Details

Part number P3T1755
Manufacturer NXP
File Size 542.42 KB
Description digital temperature sensor
Datasheet download datasheet P3T1755 Datasheet
Additional preview pages of the P3T1755 datasheet.

📁 Similar Datasheet

Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
P3T1755 I3C, I2C-bus interface, 0.5 °C accuracy, digital temperature sensor Rev. 1.2 — 15 July 2024 Product data sheet 1 General description The P3T1755 is a temperature-to-digital converter from -40 °C to +125 °C range. It uses an on-chip band gap temperature sensor and A-to-D conversion technique with an overtemperature detection. The device contains a number of configuration and data registers to store the device settings, such as device operation mode, and a temperature register (Temp) to store the digital temp reading that can be communicated by a controller via the 2-wire serial I3C (up to 12.5 MHz) and I2C (up to 3.4 MHz) interface. The I2C interface supports up to 32 target addresses and an alert function which becomes active when the temperature exceeds the programmed limits.
Published: |