Datasheet4U Logo Datasheet4U.com

PCF85363A - Tiny Real-Time Clock/Calendar

Datasheet Summary

Description

The PCF85363A is a CMOS1 Real-Time Clock (RTC) and calendar optimized for low power consumption and with automatic switching to battery on main power loss.

The RTC can also be configured as a stop-watch (elapsed time counter).

Features

  • UL Recognized Component (PCF85363ATL).
  • Provides year, month, day, weekday, hours, minutes, seconds and 100th seconds based on a 32.768 kHz quartz crystal.
  • Stop-watch mode for elapsed time counting. From 100th seconds to 999 999 hours.
  • Two independent alarms.
  • Battery back-up circuit.
  • WatchDog timer.
  • Three timestamp registers.
  • Two independent interrupt generators plus predefined interrupts at every second, minute, or hour.

📥 Download Datasheet

Datasheet preview – PCF85363A

Datasheet Details

Part number PCF85363A
Manufacturer NXP
File Size 0.96 MB
Description Tiny Real-Time Clock/Calendar
Datasheet download datasheet PCF85363A Datasheet
Additional preview pages of the PCF85363A datasheet.

📁 Similar Datasheet

  • PCF8534 - Universal LCD driver (NXP Semiconductors)
  • PCF8534A - Universal LCD driver (NXP Semiconductors)
  • PCF85132 - LCD driver (NXP Semiconductors)
  • PCF85133 - Universal LCD driver (NXP Semiconductors)
  • PCF8562 - Universal LCD driver (NXP Semiconductors)
  • PCF8564A - Real-time Clock/Calendar (NXP Semiconductors)
  • PCF8570C - 128 x 8 Bit / 256 x 8 Bit Static Ram (Philips)
  • PCF8571 - 128 x 8 Bit / 256 x 8 Bit Static Ram (Philips)
  • PCF8574 - Remote 8-Bit I/O Expander (Texas Instruments)
  • PCF8574A - Remote 8-Bit I/O Expander (Texas Instruments)
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
PCF85363A Tiny Real-Time Clock/calendar with 64 byte RAM, alarm function, battery switch-over time stamp input, and I2C-bus Rev. 3.2 — 22 September 2021 Product data sheet 1 General description The PCF85363A is a CMOS1 Real-Time Clock (RTC) and calendar optimized for low power consumption and with automatic switching to battery on main power loss. The RTC can also be configured as a stop-watch (elapsed time counter). Three time log registers triggered from battery switch-over as well as input driven events. Featuring clock output and two independent interrupt signals, two alarms, I2C interface and quartz crystal calibration, 64 byte battery backed-up RAM. For a selection of NXP Real-Time Clocks, see Table 71.
Published: |