TDA8594 Datasheet - NXP

TDA8594 4 x 50W power amplifier

The TDA8594 is a complementary quad Bridge Tied Load (BTL) audio power amplifier made in BCDMOS technology. It contains four independent amplifiers in BTL configuration. Through the I2C-bus, diagnosis of temperature warning and clipping level is fully programmable and the information available via t.

TDA8594 Features

* 2.1 General

* Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant)

* Three hardware-programmable I2C-bus addresses

* Drives 4  or 2  loads

* Speaker fault detection

* Independent short-circuit protection per channel

* Loss of ground and open VP s

TDA8594 Datasheet (355.78 KB)