Datasheet4U Logo Datasheet4U.com

DS3662 - Quad High Speed Trapezoidal Bus Transceiver

Description

The DS3662 is a quad high speed Schottky bus transceiver intended for use with terminated 120Ω impedance lines.

It is specifically designed to reduce noise in unbalanced transmission systems.

Features

  • n Pin to pin functional replacement for DS8641 n Guaranteed AC specifications on noise immunity and propagation delay over the specified temperature and supply voltage range n Temperature insensitive receiver thresholds track bus logic level n Trapezoidal bus waveforms reduce noise coupling to adjacent lines n Precision receiver thresholds provide maximum noise immunity and symmetrical response to positive and negative going pulses n Open collector driver output allows wire-OR connection n High.

📥 Download Datasheet

Datasheet preview – DS3662

📁 Similar Datasheet

  • DS3667 - 3 State Bidirectional Transceiver (National)
  • DS36277 - Dominant Mode Multipoint Transceiver (Texas Instruments)
  • DS3630-945GSE - Mini ITX Main Board Manual (Advansus)
  • DS3647A - Quad Tri-state MOS Memory I/o Register (National Semiconductor Corporation)
  • DS3658 - Quad High Current Peripheral Driver (Texas Instruments)
  • DS3680 - QUAD TELEPHONE RELAY DRIVER (Texas Instruments)
  • DS3690 - Three-Stateable Transmission Gate (Maxim Integrated Products)
  • DS36950 - Quad Differential Bus Transceiver (Texas Instruments)
  • DS36954 - Quad Differential Bus Transceiver (Texas Instruments)
  • DS3695A - Multipoint RS485/RS422 Transceivers (Texas Instruments)
Other Datasheets by National Semiconductor
  • DS3668 - Quad Fault Protected Peripheral Driver
  • DS3669 - Quad High Current Peripheral Driver
  • DS36149 - (DS36149 / DS36179) Hex MOS Drivers
  • DS36179 - (DS36149 / DS36179) Hex MOS Drivers
  • DS36276 - FAILSAFE Multipoint Transceiver
  • DS36277 - Dominant Mode Multipoint Transceiver
  • DS3628 - Octal TRI-STATE MOS Drivers
  • DS3630B - Hex CMOS Compatible Buffer

Full PDF Text Transcription

Click to expand full text
DS3662 Quad High Speed Trapezoidal Bus Transceiver July 1992 DS3662 Quad High Speed Trapezoidal™ Bus Transceiver General Description The DS3662 is a quad high speed Schottky bus transceiver intended for use with terminated 120Ω impedance lines. It is specifically designed to reduce noise in unbalanced transmission systems. The open collector drivers generate precise trapezoidal waveforms with rise and fall times of 15 ns (typical), which are relatively independent of capacitive loading conditions on the outputs. This reduces noise coupling to the adjacent lines without any appreciable impact on the maximum data rate obtainable with high speed bus transceivers.
Published: |