Datasheet4U Logo Datasheet4U.com

NCP1015 - Self-Supplied Monolithic Switcher

Description

Pin No.

223 PDIP 7 Pin Name 1 1 VCC 2 NC 3 GND 2 4 FB 3 5 DRAIN 7 GND 4 8 GND Function Powers the Internal Circuitry The IC Ground Feedback Signal Input Drain Connection The IC Ground The IC Gro

Features

  • Built.
  • in 700 V MOSFET with typical RDS(on) of 11 W.
  • Large Creepage Distance between High.
  • voltage Pins.
  • Current.
  • mode Fixed Frequency Operation: 65 kHz.
  • 100 kHz.
  • Skip.
  • cycle Operation at Low Peak Currents Only: No Acoustic Noise!.
  • Dynamic Self.
  • Supply, No Need for an Auxiliary Winding.
  • Internal 1 ms Soft.
  • start.
  • Auto.
  • recovery Internal Output Short.
  • circuit Protection.

📥 Download Datasheet

Datasheet preview – NCP1015

Datasheet Details

Part number NCP1015
Manufacturer onsemi
File Size 402.76 KB
Description Self-Supplied Monolithic Switcher
Datasheet download datasheet NCP1015 Datasheet
Additional preview pages of the NCP1015 datasheet.

📁 Similar Datasheet

  • NCP1030 - Integrated DC-DC Converter (ON)
  • NCP1031 - Integrated DC-DC Converter (ON)
  • NCP1086 - 1.5A Adjustable and 3.3V Fixed Output Linear Regulator (ON)
  • NCP1212 - Current Mode PWM Controller (ON)
  • NCP1215 - Low Cost Variable OFF Time Switched Mode Power Supply Controller (ON)
  • NCP1216 - PWM Current-Mode Controller (ON)
  • NCP1225 - Low Standby Power SMPS Controller (ON)
  • NCP1232 - Microprocessor Monitor (ON)
  • NCP1280 - Active Clamp Voltage Mode PWM Controller (ON)
  • NCP1410 - 250 mA Sync-Rect PFM Step-Up DC-DC Converter (ON)
Other Datasheets by ON Semiconductor
  • NCP1010 - Self-Supplied Monolithic Switcher
  • NCP1011 - Self-Supplied Monolithic Switcher
  • NCP1012 - Self-Supplied Monolithic Switcher
  • NCP1013 - Self-Supplied Monolithic Switcher
  • NCP1014 - Self-Supplied Monolithic Switcher
  • NCP100 - Sub 1.0V Precision Adjustable Shunt Regulator
  • NCP1000 - Integrated Off-Line Switching Regulator
  • NCP1001 - Integrated Off-Line Switching Regulator

Full PDF Text Transcription

Click to expand full text
NCP1015 Self-Supplied Monolithic Switcher for Low StandbyPower Offline SMPS The NCP1015 integrates a fixed−frequency current−mode controller and a 700 V voltage MOSFET. Housed in a PDIP−7 or SOT−223 package, the NCP1015 offers everything needed to build a rugged and low−cost power supply, including soft−start, frequency jittering, short−circuit protection, skip−cycle, a maximum peak current set−point and a Dynamic Self−Supply (no need for an auxiliary winding). Unlike other monolithic solutions, the NCP1015 is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65−100 kHz). When the current set−point falls below a given value, e.g.
Published: |