NCS5650 Datasheet (ON Semiconductor)

NCS5650, 2 Amp PLC Line Driver

Pin# Symbol Pin Function 1 Enable Enable/ Shutdown Input (Low = Enable) 2 Vcom Virtual Common at (VCC * VEE)/2; not to be used as a reference.

(See Note 1 Below) 3 AIN+ Positive (+) Input of Op Amp A 4 AIN * Negative ( *) Input of Op Amp A 5 Amp A Out Output o

NCS5650 2 Amp PLC Line Driver The NCS5650 is a high efficiency, Class A/B, low distortion power line driver.

Its design is optimized to accept a signal from a Power Line Carrier modem.

The output stage is designed to drive up to 2 A peak into an isolation transformer or simple coil coupling to the mains.

At output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail giving the user improved SNR.

Power supply options are single sided 6 V to 12 V a

NCS5650 Features

* Rail

* to

* Rail Drop of Only $1 V with Iout = 1.5 A

* VCC: Single

* Sided (6 V to 12 V) or Dual

* Balanced $6.0 V

* Flexible 4th

* Order Filtering

* Current

* Limit Set with One Resistor

* Diagnostic Flags Level Shifted t