NCV57530 - Isolated Dual Channel IGBT Gate Driver

ON Semiconductor

NCV57530 Datasheet Preview — Preview of NCV57530 PDF

Datasheet Details

Part number	NCV57530
Manufacturer	ON Semiconductor ↗
File Size	814.39 KB
Description	Isolated Dual Channel IGBT Gate Driver
Datasheet	NCV57530-ONSemiconductor.pdf

NCV57530 Product details

Description

Pin Name No.I/O Description INA INB VDDI 1 Input A non-inverting gate driver input that defines OUTA.It has an equivalent pull down resistor of 125 kW to ensure that output is low in the absence of an input signal.A positive or negative going pulse with pulse width longer than maximum value of tMIN2 is required at INA before OUTA reacts.The input logic levels scale with VDDI up to VDDI = 5 V.With VDDI above 5 V the input logic levels stay the same as for VDDI = 5 V.Maxim

Features

High Peak Output Current (±6.5 A).
Configurable as a Dual Low.
Side or Dual High.
Side or Half.
Bridge Driver.
Programmable Overlap or Dead Time control.
Disable Pin to Turn Off Outputs for Power Sequencing (NCx57540).
Enable Pin for Independent Driver Control (NCx57530).
IGBT Gate Clamping during Short Circuit.
Short Propagation Delays with Accurate Matching.
Tight UVLO Thresholds on all Power Supplies.

📁 NCV57530 Similar Datasheet

NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
NCV551 - Low-Dropout Voltage Regulator (ON)
NCV2902 - Single Supply Quad Operational Amplifiers (ON)
NCV3025833 - Smart Power Stage (onsemi)
NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
NCV70628 - Micro-stepping Motor Driver (onsemi)
NCV7383 - Transceiver (ON Semiconducto)

Other Datasheets by ON Semiconductor

NCV57540 - Isolated Dual Channel IGBT Gate Driver
NCV5700 - High Current IGBT Gate Driver
NCV57000 - IGBT
NCV57001 - IGBT Gate Driver
NCV57001F - IGBT Gate Driver
NCV5701A - High Current IGBT Gate Drivers

Published: Nov 20, 2022 |