NCV8876 Datasheet (ON Semiconductor) - Automotive Grade Start-Stop Non-Synchronous Boost Controller

NCV8876, Automotive Grade Start-Stop Non-Synchronous Boost Controller

Pin No.

Pin Symbol Function 1 STATUS This is an open *drain diagnostic.

IC status operation flag indicator.

This output is a logic low when IC VOUT is below 7.3 V and device is active.

A pull *up resistor of around 80 kW should be connected between STATUS and a microcontroller

NCV8876 Features

* include, cycle-by-cycle current limiting, protection and thermal shutdown. Additional features include low quiescent current sleep mode operation. The NCV8876 is enabled when the supply voltage drops below 7.3 V, with boost operation initiated when the supply voltage is below 6.8 V. Features