STK672-532 - 2-phase Stepping Motor Driver

ON Semiconductor

Datasheet Details

The motor speed can be controlled by the frequency of an external clock signal.
2-phase excitation or 1-2 phase excitation is selected according to switching the state of the MODE pin (low or high).
The phase is maintained even if the excitation mode is switched in the middle of operation.
The direction of rotation can be changed by applying a high or low signal to the CWB pin used to select the direction of rotation.
Supports schmitt input for 2.

📁 STK672-532 Similar Datasheet

STK672-010 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-020 - Unipolar Fixed-Current Chopper (Sanyo Semicon Device)
STK672-040 - Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) (Sanyo Semicon Device)
STK672-050 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-050-E - Stepping Motor Driver (Sanyo Semicon Device)
STK672-060 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-080 - Stepping Motor Driver (Sine Wave Drive) Output Current : 2.8 A (No Heat Sink) (Sanyo Semicon Device)
STK672-110 - Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 1.8 A (Sanyo Semicon Device)

Other Datasheets by ON Semiconductor

Published: Apr 1, 2020 |