MN6311S Datasheet - Panasonic Semiconductor

MN6311S 2K-Bit EEPROM

Pin No. 1 2 3 4 5 6 7 8 Symbol DATA CE VCC GND PGM CLK RST OE Pin Name Data I/O Chip enable Power supply voltage Ground Program Clock input Reset input Output enable MN6311S Electrical Characteristics VCC=2.6 to 3.5V, Ta= *10˚C to +60˚C 3 Volt Operation Parameter Power supply voltage "L" .

EEPROMs MN6311S 2K-Bit EEPROM Overview The MN6311S is a 2048-bit, bit sequential EEPROM with a built-in address counter. It sequentially increments the address with the clock input to produce serial output. It includes a built-in charge pump circuit and timer for automatically erasing, writing, and modifying data using only a single 3 volt power supply. To reduce write times, it includes a block write function for writing up to 32 bits at a time. This function makes it possible to rewrite the c.

MN6311S Features

* 2048 words × 1 bit organization Built-in reset function Tristate output Low power consumption

* 3 volt read: 1.5 mW (max.)

* 3 volt program: 6 mW (max.)

* 3 volt standby: 60 µW (max.) Single 3 volt power supply (charge pump circuit built-in) Self timer for use in automatically erasing an

MN6311S Datasheet (68.43 KB)