X9313 Datasheet - Renesas

X9313 Digitally Controlled Potentiometer

RH/VH and RL/VL The high (RH/VH) and low (RL/VL) terminals of the X9313 are equivalent to the fixed terminals of a mechanical potentiometer. The terminology of RL/VL and RH/VH references the relative position of the terminal in relation to wiper movement direction selected by the U/D input and not .

DATASHEET X9313 Digitally Controlled Potentiometer (XDCP™) Linear, 32 Taps, 3 Wire Interface, Terminal Voltages ± VCC FN8177 Rev 7.00 October 7, 2015 The Intersil X9313 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Betwee.

X9313 Features

* Solid-state potentiometer

* 3-wire serial interface

* 32 wiper tap points - Wiper position stored in nonvolatile memory and recalled on power-up

* 31 resistive elements - Temperature compensated - End-to-end resistance range ±20% - Terminal voltages, -VCC to +VCC

X9313 Datasheet (568.96 KB)