X9314 Datasheet - Renesas

X9314 Single Digitally Potentiometer

VH/RH and VL/ RL The high (VH/RH) and low (VL/RL) terminals of the X9314 are equivalent to the fixed terminals of a mechanical potentiometer. The minimum voltage is -5V and the maximum is +5V. It should be noted that the terminology of VL/RL and VH/RH references the relative position of the termina.

DATASHEET X9314 Terminal Voltages ±5V, 32 Taps, Log Taper Single Digitally Controlled Potentiometer (XDCP™) FN8178 Rev 3.00 July 24, 2014 The Intersil X9314 is a solid state nonvolatile potentiometer and is ideal for digitally controlled resistance trimming. The X9314 is a resistor array composed of 31 resistive elements. Between each element and at either end are tap points accessible to the wiper element. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The po.

X9314 Features

* Solid State Potentiometer

* 32 Taps

* 10kEnd to End Resistance

* Three-Wire Up/Down Serial Interface

* Wiper Resistance, 40Typical

* Nonvolatile Storage and Recall on Power-up of Wiper Position Standby Current < 500µA Max (Total Package)

X9314 Datasheet (437.96 KB)