M50FW040 - 4 Mbit 512Kb x8/ Uniform Block 3V Supply Firmware Hub Flash Memory
The M50FW040 is a 4 Mbit (512Kb x8) non-volatile memory that can be read, erased and reprogrammed.
These operations can be performed using a single low voltage (3.0 to 3.6V) supply.
For fast erasing in production lines an optional 12V power supply can be used to reduce the erasing time.
The memory i
M50FW040 4 Mbit (512Kb x8, Uniform Block) 3V Supply Firmware Hub Flash Memory s SUPPLY VOLTAGE VCC = 3V to 3.6V for Program, Erase and Read Operations s VPP = 12V for Fast Erase (optional) TWO INTERFACES Firmware Hub (FWH) Interface for embedded operation with PC Chipsets.
Address/Address Multiplexed (A/A Mux) Interface for programming equipment compatibility.
s FIRMWARE HUB (FWH) HARDWARE INTERFACE MODE 5 Signal Communication Interface supp
M50FW040 Features
* 0.6
* 0.6 to 4
* 0.6 to 13 Unit °C °C °C °C V V V Note: 1. Except for the rating "Op
