SC806 Datasheet PDF - Semtech Miniature High Current Lithium-Ion Battery Charger Specs

SC806 - Miniature High Current Lithium-Ion Battery Charger

Datasheet Summary

Description

The SC806 is a fully integrated, single cell, constant-current (cc)/constant-voltage (cv) Lithium-Ion battery charger in a tiny 3x3 mm thermally enhanced MLP package.

The SC806 can operate as a stand-alone charger or in conjunction with a Power Management Controller (PMIC).

Features

Fully integrated charger with FET pass transistor, reverse-blocking diode, sense resistor and thermal protection High Accuracy Charge Current.
Tiny 3mm x 3mm 10 lead MLP package Programmable precharge, fastcharge and termination current Battery voltage controlled to 1% accuracy Battery Charge Current accurate to 5% at 800mA Soft-start for step load and adapter plug-in Up to 1A continuous charge current Input voltage range from 3V to 6V allows seamless charging from curren.

Datasheet Details

Part number	SC806
Manufacturer	Semtech
File Size	442.08 KB
Description	Miniature High Current Lithium-Ion Battery Charger
Datasheet	SC806 Datasheet
Additional preview pages of the SC806 datasheet.

📁 Similar Datasheet

SC8002 - 3W audio amplifier (FUMAN ELECTRONICS)

SC8002B - 3W audio amplifier (FUMAN ELECTRONICS)

SC801 - Fully Integrated High Currnet Lithium-Ion Battery Charger System (Semtech Corporation)

SC802-04 - SCHOTTKY BARRIER DIODE (Fuji Electric)

SC802-06 - SCHOTTKY BARRIER DIODE (Fuji Electric)

SC802-09 - SCHOTTKY BARRIER DIODE (Fuji Electric)

SC803 - Fully Integrated High Current Lithium-Ion Battery Charger System (Semtech Corporation)

SC8035 - (SC80xx) Single Chip 8-Bit Microcontroller (NXP)

SC8039 - (SC80xx) Single Chip 8-Bit Microcontroller (NXP)

SC8040 - (SC80xx) Single Chip 8-Bit Microcontroller (NXP)

Full PDF Text Transcription

Click to expand full text

Miniature High Current www.DataSheet4U.com Lithium-Ion Battery Charger POWER MANAGEMENT Description The SC806 is a fully integrated, single cell, constant-current (cc)/constant-voltage (cv) Lithium-Ion battery charger in a tiny 3x3 mm thermally enhanced MLP package. The SC806 can operate as a stand-alone charger or in conjunction with a Power Management Controller (PMIC). The SC806 has a pre-charge function for trickle charging deeply discharged batteries. The fast charge current is enabled automatically when the battery voltage reaches the required threshold. When the battery reaches the constant voltage or CV portion of the charge curve the SC806 switches to CV regulation mode. In this mode the output current decays until the termination current is reached.

Published: Apr 28, 2010 |