Datasheet4U Logo Datasheet4U.com

SM5306 - High-Efficiency Dual-String

Datasheet Summary

Description

The SM5306 is a current mode boost converter which supplies the power and controls current in up to two strings of 10 LEDs per string.

Programming is done over an I2Ccompatible interface.

The maximum LED current is adjustable from 5mA to 28.5mA.

Features

  • Drives up to Two String of 10 Series LEDs.
  • 11-bit Programmable Dimming Resolution.
  • Exponential or Linear Brightness Control.
  • PWM Brightness Control for CABC Operation.
  • Independent Current Control per String.
  • Internal Soft-Start Limits Inrush Current.
  • Wide 2.5V to 5.5V Input Voltage Range.
  • Adaptive Headroom Control.
  • Selectable Boost Frequency of 500kHz or 1MHz with Optionally Additional Offset.
  • 12-Bump 1.65mm x 1.43mm WLCSP Package.
  • Protecti.

📥 Download Datasheet

Datasheet preview – SM5306

Datasheet Details

Part number SM5306
Manufacturer Silicon Mitus
File Size 1.01 MB
Description High-Efficiency Dual-String
Datasheet download datasheet SM5306 Datasheet
Additional preview pages of the SM5306 datasheet.

📁 Similar Datasheet

  • SM530 - GENERAL PURPOSE RECTIFIER (JIEJIE)
  • SM5301AS - 3-channel Video Buffer (Nippon Precision Circuits)
  • SM5301BS - 3-channel Video Buffer (Nippon Precision Circuits)
  • SM5304 - Current Regulator Diodes (International Semiconductor)
  • SM5304AV - Video Buffer (Nippon Precision Circuits)
  • SM5307A - 3-channel Video Buffer (NPC)
  • SM5307C - 3-channel Video Buffer (NPC)
  • SM5308 - 2.1A charging 2.4A discharge high integration mobile power SOC (HICHON)
  • SM5308AV - 3-channel Video Buffer (NPC)
  • SM5309A - 3-channel Video Buffer (NPC)
Other Datasheets by Silicon Mitus

    Full PDF Text Transcription

    Click to expand full text
    CONFIDENTIAL - Target Datasheet SM5306 High-Efficiency Dual-String with up to 10-WLED White LED Driver Description The SM5306 is a current mode boost converter which supplies the power and controls current in up to two strings of 10 LEDs per string. Programming is done over an I2Ccompatible interface. The maximum LED current is adjustable from 5mA to 28.5mA. At any given maximum LED current the LED brightness is further adjusted with exponential or linear dimming steps. Additionally, pulsed width modulation (PWM) brightness control can be enabled allowing for LED current adjustment by a logic level PWM signal. The boost switching frequency is programmable at 500kHz for low switching loss performance or 1MHz to allow the use of tiny low profile inductors.
    Published: |