TMC423 - Serial Triple Incremental Encoder Interface

Product Overview

TRINAMIC

Datasheet Details

Part number	TMC423
Manufacturer	TRINAMIC
File Size	217.25 KB
Description	Serial Triple Incremental Encoder Interface
Datasheet	TMC423 Datasheet
Additional preview pages of the TMC423 datasheet.

Product details

Description

Apr, 4th, 2007 June 6th, 2007 June 20th, 2007 Name Technical Department Technical Department Technical Department Technical Department Technical Department Technical Department Technical Department Technical Department Dw HC HC, Dw Copyright © 2004 TRINAMIC Motion Control GmbH & Co.KG TMC423 Data Sheet (V1.13 / June 20th, 2007) 3/22 Table of Contents 1 Pinout 5 1.1 Pin Description 6 1.2 Recommended Operating Conditions 7 1.3 Electrical Characteristics 7 2 Block Diagram 8 3 Ap

Features

The TMC423 is a triple incremental encoder input chip, which interfaces to any SPITM compatible controller. The TMC423 can especially be used in conjunction with the TMC428 triple stepper motor controller to provide position verification or stabilization using some additional software. It integrates 24 bit counters for each encoder to provide a high position resolution without CPU interaction. Further it allows dynamic resolution adaptation to allow direct comparison of encoder counters with mot.

📁 Similar Datasheet

TMC400A - Current Transducer (Topstek)
TMC-4B28 - High power VCSEL TO-46 metal (ETC)
TMC-4F20 - VCSEL TO-46 metal can (ETC)
TMC-4F28 - High power VCSEL TO-46 metal can (ETC)
TMC-4F30-xxx - VCSEL TO-46 metal can (ETC)
TMC-5A31-xxx - High Speed VCSEL TO-46 metal can (ETC)
TMC-5B21 - High speed VCSEL TO-46 metal can (ETC)
TMC-5F31-XXX - High speed VCSEL TO-46 metal can (ETC)

Other Datasheets by TRINAMIC

TMC4210 - Low cost 1-Axis Stepper Motor Controller
TMC424 - Serial Triple Incremental Encoder Interface
TMC428 - Intelligent Triple Stepper Motor Controller
TMC429 - Intelligent Triple Stepper Motor Controller
TMC4330A - The S-ramp and sixPoint ramp motion controller
TMC4331A - The S-ramp and sixPoint ramp motion controller

Published: Jul 11, 2016 |