TB6559FG Datasheet PDF - Toshiba Semiconductor Full-Bridge DC Motor Driver IC Specs

TB6559FG - Full-Bridge DC Motor Driver IC

Datasheet Summary

Description

IN1 Control signal input 1 SB Standby pin Vref Supply voltage pin for current control S-GND VCC (NC) OUT1 RSA OUT2 P-GND Ground Power supply pin No connection Output pin 1 Connection pin for an output current detection resistor Output pin 2 Power ground ALERT Protective operation alert outp

Features

Power supply voltage: 50 V (max).
Output current: 2.5 A (max).
Low-ON resistance (upper and lower sum): 1.3 Ω (typ. ).
Constant-current or direct PWM.
Standby mode.
Clockwise (CW), counterclockwise (CCW), short brake and stop.
Overcurrent protection.
Thermal shutdown Weight: 0.50 g (typ. ) 1 2013-04-10 Block Diagram VREG ALERT VCC 15 11 5 REG IN1 1 IN2 16 SB 2 Decoder Overcurrent Protection Thermal Shutdown Timi.

Datasheet Details

Part number	TB6559FG
Manufacturer	Toshiba Semiconductor
File Size	328.84 KB
Description	Full-Bridge DC Motor Driver IC
Datasheet	TB6559FG Datasheet
Additional preview pages of the TB6559FG datasheet.

📁 Similar Datasheet

TB6551F - 3-Phase Full-Wave Sine-Wave PWM Brushless Motor Controller (Toshiba)

TB6551FAG - 3-Phase Full-Wave Sine-Wave PWM Brushless Motor Controller (Toshiba)

TB6551FG - 3-Phase Full-Wave Sine-Wave PWM Brushless Motor Controller (Toshiba)

TB6556FG - 3-Phase Full-Wave Sine-Wave PWM Brushless Motor Controller (Toshiba)

TB6500AH - 2 PHASE BIPOLAR STEPPER + FULL BRIDGE DRIVER (Toshiba)

TB6501P - BRIDGE DRIVER WITH ROTATION DETECTOR (Toshiba)

TB6504F - PWM CHOPPER TYPE BIPOLAR STEPPING MOTOR DRIVER (Toshiba)

TB6504FG - PWM CHOPPER TYPE BIPOLAR STEPPING MOTOR DRIVER (Toshiba)

TB6508F - CYLINDER MOTOR CONTROL DRIVER IC FOR VTR MOVIE (Toshiba)

TB6512AF - PWM CHOPPER TYPE BIPOLAR STEPPING MOTOR DRIVER (Toshiba)

Full PDF Text Transcription

Click to expand full text

TOSHIBA Bi-CD Integrated Circuit Silicon Monolithic TB6559FG Full-Bridge DC Motor Driver IC TB6559FG The TB6559FG is a full-bridge DC motor driver with LDMOS output transistors. It uses P-channel MOSFETs on the high side and N-channel MOSFETs on the low side, eliminating the need for a charge pump. The TB6559FG achieves high thermal efficiency. Four operating modes are selectable via IN1 and IN2: clockwise (CW), counterclockwise (CCW), short brake and stop. Features • Power supply voltage: 50 V (max) • Output current: 2.5 A (max) • Low-ON resistance (upper and lower sum): 1.3 Ω (typ.) • Constant-current or direct PWM • Standby mode • Clockwise (CW), counterclockwise (CCW), short brake and stop • Overcurrent protection • Thermal shutdown Weight: 0.50 g (typ.

Published: Feb 11, 2009 |