TB9102FNG Datasheet - Toshiba

TB9102FNG 3ch H-bridge / 6ch Half-bridge driver

1 OC1 Half-bridge C Out1 2 OC2 Half-bridge C Out2 3 GNDC GND for OC1,OC2 4 TEST1 TEST Input Pin 5 SO SPI Output IN / OUT OUT OUT IN OUT CIRCUIT NOTE Bip/HVMOS (Note1) Bip/HVMOS (Note1) - CMOS RHON=RLON=0.5Ω(typ.) RHON=RLON=0.5Ω(typ.) - Pull Down(100kΩ) Connect to GND on PCB CMOS .

TOSHIBA Bi-CMOS Linear Integrated Circuit Silicon Monolithic TB9102FNG TB9102FNG 3ch H-bridge / 6ch Half-bridge driver for DC Brushed Motor TB9102FNG is a 3chH-bridge / 6ch Half-bridge driver which is designed specifically for Automotive. 6High-side/6Low-side DMOS transistors are built-in for directly driving small DC Brushed motor. SPI interface is built-in for motor operation by external MCU. Also, miscellaneous abnormal detection such as Over Current/Over Voltage/Over Temperature are built.

TB9102FNG Features

* Motor Driver : Build-in 3ch H-bridge/6ch Half-bridge (RHON=0.5Ω (typ.)/RLON=0.5Ω (typ.) at 25°C) External MCU I/F : SPI Interface(16Bit Shift Register, CLK,CSB) Abnormal detection : Over Current / Over Temperature / Over Voltage / 5V (VDD, VCC) Low Voltage Detection (Power on reset) with monito

TB9102FNG Datasheet (1.17 MB)