SN74LVC828A - 10-Bit Buffer/Driver

Texas Instruments

📥 Download Datasheet

SN74LVC828A Datasheet Preview — Preview of SN74LVC828A PDF

Datasheet Details

Part number	SN74LVC828A
Manufacturer	Texas Instruments
File Size	902.84 KB
Description	10-Bit Buffer/Driver
Datasheet	SN74LVC828A-etcTI.pdf

SN74LVC828A Product details

Description

ORDERING INFORMATION This 10-bit buffer/bus driver is designed for 1.65-V to 3.6-V VCC operation.The SN74LVC828A provides a high-performance bus interface for wide data paths or buses carrying parity.The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output-enable (OE1 or OE2) input is high, all ten outputs are in the high-impedance state.The SN74LVC828A provides inverting data at its outputs.Inputs can be driven from either 3.3-V or 5-V devices.This fe

Features

Operates From 1.65 V to 3.6 V.
Inputs Accept Voltages to 5.5 V.
Max tpd of 6.7 ns at 3.3 V.
Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C.
Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
Ioff Supports Partial-Power-Down Mode Operation.
Latch-Up Performance Exceeds 250 mA Per JESD 17.

📁 SN74LVC828A Similar Datasheet

SN74LVC1G125 - high performance non-inverting buffer (UMW)
SN74LVC1G34 - Single buffer (UMW)
SN74L71 - AND-Gate R-S Master-Slave F-F (National Semiconductor)
SN74L74N - Dual D-Type Flip-Flop (ETC)
SN74LS00 - QUAD 2-INPUT NAND GATE (Motorola)
SN74LS02 - QUAD 2-INPUT NOR GATE (Motorola)
SN74LS04 - Hex Inverter (ON Semiconductor)
SN74LS04D - Hex Inverter (ON Semiconductor)

Other Datasheets by Texas Instruments

SN74LVC821A - 10-BIT BUS-INTERFACE FLIP-FLOP
SN74LVC823A - 10-BIT BUS-INTERFACE FLIP-FLOP
SN74LVC827A - 10-Bit Buffer/Driver
SN74LVC841A - 10-BIT BUS-INTERFACE D-TYPE LATCH
SN74LVC861A - 10-Bit Bus Transceiver
SN74LVC863A - 9-BIT BUS TRANSCEIVER

Published: Dec 16, 2021 |